Water Damage Repair in Texas, Done Right the First Time
Fast extraction, structural drying, and permanent repairs statewide
Water Damage Repair in Texas means stopping the source, pulling the water, and rebuilding what it ruined. Texas Water Response handles all three, from a burst pipe in Amarillo to storm surge flooding in Brownsville. We serve homeowners, landlords, and business owners across the state, and we answer the phone 24/7 because water damage gets more expensive every hour it sits.
What Water Damage Repair in Texas Actually Involves
Water Damage Repair in Texas is the full scope of work that turns a wet, damaged building back into a dry, structurally sound one. It starts with finding the source, whether that is a slab leak under a Laredo foundation or a failed water heater in a Dallas garage. From there we extract standing water, map hidden moisture with a thermal imaging camera and moisture meter, dry the structure with air movers and dehumidifiers, then repair drywall, baseboards, subflooring, and paint. Repair is not a patch job. It is the finished result.
Texas buildings take water from every direction. Gulf humidity, spring hail storms, hard freezes that split pipes, and clay soil that shifts and cracks foundations all push water where it does not belong. That is why Texas water damage repair services have to be built around the state's actual weather, not a generic playbook. If you are searching for water damage repair near me Texas and you need help tonight, our crews work through the night to stop the spread before mold growth after water damage turns a repair into a rebuild.
Why Texas Property Owners Call Us First
Water damage gets worse on a clock. Every hour a wet wall stays wet, the repair bill climbs and the odds of mold climb with it. Here is what you get when you call us instead of waiting it out.
Faster Response, Less Damage
We answer 24/7 and roll trucks with water extraction units already loaded. On a typical residential call, extraction begins within hours of your first call. That speed matters: carpet, padding, and drywall that would have been a total loss at 48 hours can often be dried in place at 12. Less demolition means a smaller bill and a shorter repair.
Drying Verified by Instruments
We do not guess when a room is dry. Every job is tracked with a hygrometer and moisture meter readings taken daily, and we photograph the numbers. Structural drying follows the IICRC Applied Structural Drying standard, so we know when to pull equipment and when to leave it running. You get documentation, not a hand-wave.
Repairs Handled In-House
Extraction is only half the job. Our crews also replace drywall, baseboards, subflooring, and insulation, and we finish with waterproof sealant and paint where it belongs. One team from the first wet-vac pass to the final coat means no gap where a second contractor blames the first. That matters on commercial water damage repair Texas jobs with tenants waiting.
Insurance Documentation Done Right
We build the claim file the way adjusters want it: moisture readings, photos, equipment logs, and an Xactimate estimate with line items that match the work performed. Whether insurance covers the loss or you are paying out of pocket, you get a clear written scope. It shortens approvals and cuts the back-and-forth that delays repairs.
What to Expect From Start to Finish
Every job follows the same five stages, whether it is a 200-square-foot bathroom or a 20,000-square-foot warehouse. Here is what happens, who does it, and roughly how long each stage takes.
Emergency Call
You call, we ask three questions: what is wet, where is the water coming from, and is the power safe. Within minutes we dispatch a crew and give you two or three things to do right now, like shutting off the supply valve or killing the breaker to a flooded room. A project manager calls you back with an arrival window.
Inspection and Scope
On arrival we find the source and stop it. We walk the building with a moisture meter, thermal imaging camera, and bore scope to find water hiding behind walls and under floors. You get a written scope with photos before work begins. Most inspections take 45 to 90 minutes on a typical home.
Extraction and Drying
Standing water comes out first with water extraction units and wet/dry vacuums. Then we set air movers and dehumidifiers to pull moisture out of the air and materials. A standard room takes two to four days to dry; a flooded basement can run five to seven. We check readings daily and adjust equipment as needed.
Cleaning and Treatment
Once the structure is dry, we treat affected surfaces with antimicrobial solution, remove contaminated materials, and run air scrubber filters to clear the air. Sewage backup and storm surge flooding get full sanitization. This stage usually takes one day but can stretch longer if mold growth after water damage is already present.
Repair and Final Walk
We replace drywall, baseboards, subflooring, and insulation, then prime and paint. Final moisture readings confirm the structure is dry before we close walls. You walk the job with the project manager, sign off, and receive your documentation packet for the insurance claim. Most repairs finish within one to two weeks of the dry-out.
Local Experience You Can Verify
Independent providers hold IICRC Water Damage Restoration Technician (WRT) and Applied Structural Drying (ASD) certifications, and we carry the Texas Mold Remediation Contractor License required for remediation work in this state. We are an EPA Lead-Safe Certified firm, which matters in older Texas homes where disturbing painted surfaces can release lead dust. Every crew member completes OSHA 10-Hour Construction Safety training. We have dried and repaired homes, restaurants, schools, and warehouses across Texas, and we know how this state's heat, humidity, and soil behave when water gets loose.
- Independent providers send IICRC WRT- and ASD-certified technicians to every water damage crew
- Providers carry a Texas Mold Remediation Contractor License for remediation and cleanup work
- EPA Lead-Safe certified providers for pre-1978 homes and commercial buildings
- Provider field staff with OSHA 10-Hour Construction Safety training completed
- Direct experience with slab leaks, burst pipes, and storm surge flooding statewide
Why Texas Water Response Stands Out for Water Damage Repair
Plenty of companies will pump water out of your floor. Fewer will dry it correctly, document it for your adjuster, and rebuild it so the damage does not come back. The independent providers we refer do all three.
Statewide Coverage, One Number
From El Paso to Brownsville, from Amarillo to Corpus Christi, one call connects you with a local provider who can get to you. Providers are based in multiple metros, so nobody is driving four hours to start your job. That matters when a burst pipe is dumping 10 gallons a minute into your kitchen.
Documentation for Every Job
Moisture readings, thermal images, equipment placement logs, and daily drying reports go into your file. Adjusters approve claims faster when the paperwork is clean. If you have ever had a claim denied for lack of proof, you understand why this matters more than a friendly phone voice.
Repairs, Not Just Dry-Outs
Provider water damage repair in Texas includes the rebuild: drywall, trim, subflooring, paint, and waterproof sealant. You are not left hunting for a contractor after the fans leave.
Help Is One Call Away
You get a written scope of the repair work before it begins. If the job changes because a provider finds hidden damage, work stops and you talk it through first. That is how water damage repair in Texas should work, and it is how the providers we refer run every job.
What Is Included in Water Damage Repair
Our water damage repair scope covers the full job: finding and stopping the source, extracting water, drying the structure, cleaning affected surfaces, and rebuilding what was damaged. We handle the whole sequence with our own crews, so you are not coordinating between a dry-out company and a separate contractor. Here is what the standard scope covers.
What's Included
Source Control and Inspection
We locate the leak with a moisture meter, thermal imaging camera, and bore scope, then stop it. That might mean shutting a supply valve, repairing a burst pipe, or isolating a failed water heater. Nothing else starts until the water stops entering the building.
Water Extraction and Drying
Standing water comes out with extraction units and wet/dry vacuums. Then Providers place air movers and dehumidifiers, track daily readings with a hygrometer, and dry to the IICRC ASD standard. You get documented proof the structure is dry before walls close.
Cleaning and Antimicrobial Treatment
Affected surfaces get treated with antimicrobial solution, and contaminated materials are removed and bagged. Air scrubber filters run to clear dust and spores. Sewage backup and floodwater losses get full sanitization before any repair work begins.
Structural Repairs
We replace drywall, baseboards, subflooring, and thermal insulation as needed, then finish with waterproof sealant and paint. Repairs match existing materials so the finished room looks like nothing happened. This is the stage most dry-out-only companies leave to someone else.
Insurance Documentation
Photos, moisture logs, equipment records, and an Xactimate estimate go into a packet you can hand to your adjuster. Clear documentation speeds approvals and reduces disputes. We build it on every job, whether you are filing a claim or paying directly.
Water Problems We Fix Across Texas
Water damage rarely announces itself politely. It shows up as a stain on the ceiling, a soft spot in the floor, or a smell you cannot place. These are the problems we see most often, and what happens if they are left alone.
Burst pipe flooding a room overnight
A split supply line can release hundreds of gallons before morning. Carpet, drywall, and cabinetry soak through, and mold growth after water damage can begin within 24 to 48 hours in Texas humidity.
We shut off the supply, extract the standing water, and dry the room with air movers and dehumidifiers. Then we repair the pipe and replace ruined drywall, baseboards, and flooring. Most burst pipe jobs are dry in three to four days and fully repaired within two weeks.
Slab leak soaking floors from below
Water wicking up through a foundation crack ruins flooring, baseboards, and sometimes the bottom of interior walls. Because the source is underground, homeowners often miss it until the floor buckles or the water bill spikes.
We locate the leak with a thermal imaging camera and moisture meter, isolate the affected area, and dry the slab and flooring from above. Once the plumbing repair is complete, we replace subflooring, flooring, and baseboards. Drying a slab leak typically takes five to seven days.
Sewage backup contaminating a bathroom or basement
Sewage is contaminated water. It carries bacteria that make the space unsafe, and porous materials like drywall and carpet cannot be saved. Waiting makes the contamination spread and the cleanup more expensive.
We remove contaminated materials, treat surfaces with antimicrobial solution, run air scrubber filters, and verify dryness with instruments. Repair follows once the space is clean and dry. This is licensed remediation work in Texas, and we hold the required contractor license.
Roof leak staining ceilings and walls
A small roof leak can soak insulation and drywall for weeks before it shows as a stain. By then, the ceiling may be sagging and mold may be growing in the attic cavity above.
We trace the leak with a bore scope and infrared thermometer, dry the ceiling cavity and insulation, and replace damaged drywall. If the roof itself needs patching, we coordinate that before closing up the interior. Typical ceiling repairs finish within a week of dry-out.
When to Call for Water Damage Repair
A water heater in a Plano garage fails and floods the surrounding floor and stored boxes.
We shut off the supply, extract the water, and dry the concrete and drywall with air movers and dehumidifiers. We check the water heater pan and surrounding framing for hidden moisture before finishing.
The garage is dry in two to three days, and the damaged drywall and baseboards are replaced within a week.
A commercial building in Irving takes on water when a storm drain backs up during heavy rain.
Our crew extracts the standing water, sets commercial dehumidifiers and air movers, and documents the loss for the property's insurance claim with moisture readings and photos.
The floor dries in four to five days, and tenants return to a clean, dry space without a long shutdown.
A winter freeze splits a pipe in an unheated Austin rental, soaking a bedroom wall and carpet.
We stop the flow, remove the wet carpet and padding, dry the wall cavity, and treat the framing with antimicrobial solution. Then we repair the pipe and replace the drywall and flooring.
The unit is dry in three days and fully repaired in ten, ready for the next tenant.
A Round Rock homeowner notices a musty smell and a soft spot near the washing machine.
We trace the appliance overflow with a moisture meter and thermal camera, dry the subfloor, and replace the damaged section. We also check the supply hoses and drain pan.
The smell is gone, the floor is solid, and the repair is finished in under a week.
Equipment and Methods We Use
Tools & Equipment
Moisture meter and hygrometer
Used to measure moisture content in drywall, wood, and subflooring, and to track relative humidity in the air. Daily readings tell us whether drying is on track or whether equipment needs to move.
Thermal imaging camera
Reveals temperature differences that point to hidden water behind walls, under floors, and above ceilings. It lets us find the leak and the spread without tearing out materials we can save.
Air movers and dehumidifiers
The core of structural drying. Air movers evaporate moisture from surfaces while dehumidifiers pull it out of the air. We size the equipment count to the room volume and moisture load.
Water extraction unit and wet/dry vacuum
Removes standing water from carpet, padding, and hard floors before drying begins. Truck-mounted units handle large losses; portable units reach tight spaces like closets and cabinets.
Bore scope and infrared thermometer
The bore scope lets us look inside wall cavities without a full tear-out. The infrared thermometer confirms surface temperatures and helps verify that drying equipment is reaching the right areas.
Air scrubber filters
Run during cleanup and remediation to capture dust, spores, and debris from the air. Essential on sewage backup and mold jobs where airborne contamination is a concern.
Methods
IICRC Applied Structural Drying (ASD) standard
This is the drying protocol we follow on every job. It sets target moisture levels for different materials and requires documented daily readings. When the numbers hit target, we stop drying. That prevents both under-drying, which invites mold, and over-drying, which wastes your money.
Xactimate estimating
We build repair estimates in Xactimate, the same platform most insurance adjusters use. Line items match the work performed, which reduces back-and-forth and speeds claim approval. You get a written scope you can compare against the adjuster's numbers.
Containment with polyethylene sheeting
On mold and sewage jobs, we seal off the affected area with polyethylene sheeting and run air scrubber filters to keep contamination from spreading. Containment protects the rest of your home or building while we work.
Antimicrobial treatment and material removal
Porous materials that cannot be dried or cleaned are removed and bagged. Remaining surfaces get treated with antimicrobial solution. This step is what keeps mold growth after water damage from returning once the repair is finished.
How Water Damage Repair Runs in Texas
Texas is not one climate. The Gulf Coast runs humid year-round, which slows drying and pushes mold growth after water damage to start fast. North and West Texas swing from 100-degree summers to hard freezes that split pipes in uninsulated attics and crawl spaces. Central Texas sits on expansive clay soil that moves with moisture, cracking foundations and opening paths for foundation water intrusion. We adjust drying plans to the region: more dehumidification on the coast, faster freeze-damage response in the Panhandle, and slab leak experience in the I-35 corridor. Building stock matters too. Older homes in Waco and San Antonio often have cast iron drains and galvanized supply lines that fail with age, while newer construction in Frisco and McKinney tends to have PEX lines and tighter wall cavities that hide leaks longer. Texas flood damage repair also has to account for storm surge flooding along the coast and flash flooding in Hill Country towns. Our crews carry the equipment and the licensing to handle all of it, from a single-room extraction to a full commercial dry-out.
Service Areas
Older commercial buildings and homes near the river corridor see more slab leaks and aging plumbing failures. We know the building stock and plan repairs around it.
Rapid growth means newer homes with PEX plumbing and tight wall cavities. Leaks hide longer here, so thermal imaging matters more than a visual check.
Historic homes with pier-and-beam foundations and original plumbing. Water often travels under the floor, so we check the crawl space on every call.
Mixed new construction with modern drainage, but clay soil still shifts. Foundation water intrusion shows up after heavy spring rains.
Local Considerations
Gulf Coast humidity above 70 percent most of the year
Drying takes longer because the air holds more moisture. We run additional dehumidifiers and extend drying timelines by a day or two on coastal jobs to hit target moisture levels.
Hard freezes that split pipes in unheated spaces
Freeze events trigger a wave of burst pipe calls across North and West Texas. We stage equipment ahead of forecast freezes so crews can respond the same night.
Expansive clay soil across Central Texas
Soil movement cracks foundations and lets water intrude from below. Slab leaks and foundation water intrusion are common, and repairs have to address both the water and the entry point.
Storm surge and flash flooding along the coast and in Hill Country
Floodwater carries contaminants, so cleanup requires full sanitization, not just drying. We treat flood losses as contaminated water jobs from the start.
Burst Pipe in a Laredo Hallway
A supply line split behind a hallway wall overnight and soaked 400 square feet of carpet, padding, and baseboards. The homeowner found standing water at 6 a.m. and called us by 6:30. Moisture readings showed the wall cavity at 28 percent, well above the dry standard.
We extracted the standing water, removed the ruined carpet and padding, and dried the wall cavity and slab. Four days of equipment brought readings down to 11 percent. New baseboards and flooring went in on day nine, and the hallway looked untouched.
Maintenance & Follow-up
Check supply lines and shutoff valves twice a year, and know where your main shutoff is. A $15 valve replacement prevents a $4,000 repair.
A 12-year-old water heater in a rental unit failed and released 30 gallons into a bedroom and closet. The tenant called it in at 11 p.m. Carpet, drywall, and the closet subfloor were saturated, and humidity in the unit had climbed to 78 percent.
Our crew arrived before midnight, extracted the water, and set air movers and a dehumidifier. Drying finished in three days with readings at 10 percent. We replaced the drywall, baseboards, and subflooring, and the unit was ready for the tenant in nine days.
Maintenance & Follow-up
Flush the water heater annually and replace it every 10 to 12 years. A $200 anode rod swap can add years to the tank.
A main line backup pushed sewage into a 600-square-foot dining area overnight. Contaminated water soaked the base of two walls and the flooring. The restaurant was closed, and the health inspector required full remediation before reopening.
We removed contaminated drywall and flooring, treated surfaces with antimicrobial solution, ran air scrubber filters, and dried the structure in five days. Repairs, including new drywall, baseboards, and flooring, finished on day twelve. The restaurant passed inspection and reopened on day thirteen.
Maintenance & Follow-up
Have drain lines jetted every 12 to 18 months, and install a backflow preventer if your building does not have one. Both are cheap compared to a shutdown.
What Water Damage Repair Costs
Water damage repair pricing in Texas depends on how far the water spread, what materials it ruined, and whether contamination is involved. Typical 2026 residential jobs run $1,200 to $6,500, with most single-room losses landing between $1,800 and $3,500. Commercial jobs are quoted per square foot after inspection. We give you a written scope and price before work begins, so you know the number before equipment starts running. If we find hidden damage mid-job, we stop and talk to you first.
Pricing Factors
Water category and contamination
Clean water from a supply line is the simplest loss. Sewage backup and floodwater are contaminated, which adds material removal, antimicrobial treatment, and air scrubbing. That can add 30 to 50 percent to the total.
Square footage affected
More wet area means more extraction, more drying equipment, and more material to replace. A 100-square-foot bathroom is a different job than a 1,200-square-foot finished basement. We measure the affected area during inspection.
Materials damaged
Carpet and padding are cheap to replace. Hardwood, tile, and cabinetry are not. If water reached the subfloor or wall framing, the repair scope grows. We document what can be dried in place and what has to come out.
How long the water sat
Water caught within a few hours is often a dry-out and a small repair. Water that sat for days spreads further and invites mold growth after water damage, which adds remediation to the scope. Fast calls cost less.
Access and building type
Crawl spaces, second floors, and commercial buildings with drop ceilings take more labor to access and dry. A slab leak in a pier-and-beam home is a different job than one in a slab-on-grade house. Access affects both time and equipment placement.
Investment Range
$1,200 - $6,500 for most residential jobs; commercial quoted per square foot
Based on project scope
Value You Get
The price covers the whole job: extraction, drying, cleaning, and the rebuild. You are not paying twice for a dry-out company and a separate contractor. One scope, one crew, one invoice, and documentation that supports your insurance claim.
How long does water damage repair take in Texas?
Plan on three to five days for extraction and drying, then one to two weeks for repairs. A small bathroom might dry in two days and be fully repaired in a week. A flooded basement with sewage backup can take seven days to dry and three weeks to rebuild. We give you a written timeline after the inspection, not a guess.
Does insurance cover water damage repair in Texas?
Yes, most Texas homeowner and commercial policies cover sudden water damage like a burst pipe, appliance overflow, or water heater failure. Flood damage from rising water usually requires separate flood coverage. We document the loss with moisture readings, photos, and an Xactimate estimate so your adjuster has what they need to approve the claim.
What is included in water damage repair in Texas?
Our scope includes source control, water extraction, structural drying, antimicrobial treatment, removal of unsalvageable materials, and the rebuild: drywall, baseboards, subflooring, insulation, paint, and waterproof sealant. We also handle mold remediation if growth is found. You get one written scope covering the whole job, from the first wet-vac pass to the final walkthrough.
Licensed, Certified, and Documented
Certifications
Reviews
Called at 7 a.m. with water everywhere from a burst pipe. Crew was at the house by 9 and had extraction running by 9:30. They explained every step, showed me the moisture readings each day, and finished the drywall and paint in under two weeks. Worth every penny.
Our restaurant had a sewage backup on a Saturday. They handled the cleanup, dealt with the health inspector's requirements, and got us reopened in thirteen days. The documentation they gave our insurance company was thorough. No surprises on the bill.
Slab leak in our Laredo home. They found it with a thermal camera when two other companies missed it. Dried the floors, replaced the baseboards, and matched the tile. Professional from start to finish, and they answered every call.
Water heater failed in our rental and flooded two rooms. They extracted the water that night, kept us updated every morning, and had the unit ready for the tenant in nine days. Fair price and no runaround. I manage twelve properties and they are my first call now.
Related Services
Water Damage Restoration
Restoration is the broader process that repair finishes. We extract, dry, clean, and rebuild, so your Texas property ends up dry and structurally sound. If you need the full scope rather than a single repair, this is the service to start with.
Water Damage RestorationEmergency Water Removal
When water is still rising, removal comes first. We pull standing water with extraction units and wet/dry vacuums, then stabilize the room so drying and repair can begin. This is the 24/7 service you call at 2 a.m. when a pipe lets go.
Emergency Water RemovalWater Extraction
Extraction removes the bulk water from carpet, padding, and hard floors before drying starts. Skipping it traps moisture under surfaces and slows the whole job. We use truck-mounted and portable units sized to the loss, from a single room to a whole commercial floor.
Water ExtractionFlood Damage Cleanup
Floodwater carries silt, chemicals, and sometimes sewage, so cleanup is more than pumping. We remove contaminated materials, sanitize with antimicrobial solution, and dry the structure. This service pairs with repair when flooding has ruined drywall, flooring, or insulation.
Flood Damage CleanupWater Mitigation
Mitigation is the work that limits how much damage occurs before repairs start: stopping the source, containing the spread, and beginning drying fast. Good mitigation is what keeps a small leak from becoming a full rebuild. We start it the moment we arrive.
Water MitigationBurst Pipe Cleanup
A burst pipe can dump hundreds of gallons before you find the shutoff. We stop the flow, extract the water, dry the cavities, and repair the pipe and the materials around it. Texas freezes split pipes every winter, and we handle the cleanup and the fix.
Burst Pipe CleanupSewage Backup Cleanup
Sewage backup is a contaminated water loss, not a simple spill. We remove affected materials, disinfect with antimicrobial solution, run air scrubber filters, and verify dryness with instruments. Repair follows once the space is safe and dry.
Sewage Backup CleanupStructural Drying
Drying is a measured process, not a fan in the hallway. Providers place air movers and dehumidifiers based on moisture readings and track progress daily against the IICRC ASD standard. When the numbers say dry, we stop. Not before, and not three days later.
Structural DryingMold Remediation
Mold growth after water damage usually starts within 24 to 48 hours in Texas humidity. We contain the area with polyethylene sheeting, remove affected materials, treat surfaces, and filter the air. Remediation is licensed work in Texas, and we hold the required contractor license.
Mold RemediationWhat Texas Customers Say
Real experiences from customers who chose our Water Damage Repair services
"A slab leak soaked half our hallway before we noticed. The crew found it with a thermal camera in under an hour, pulled the water, and had drying equipment running the same night. Four days later the readings were dry and they replaced the baseboards and tile. The insurance packet they put together got our claim approved without a fight."
Marisol R.
Homeowner, Laredo
"A tenant's water heater failed on a Friday night and flooded two units. Texas Water Response had extraction units on site before midnight and kept us updated every morning with moisture readings. They dried both units, replaced the ruined drywall, and we had tenants back in nine days. Straight answers the whole way."
Dwayne K.
Property Manager, McAllen
"A supply line burst above our dining room and we were closed for a week. The team extracted the water, dried the ceiling and walls, and rebuilt everything, including new drywall and paint. They worked around our health inspection schedule and gave us a written scope before starting. We reopened on day eight."
Priya N.
Restaurant Owner, Houston
Get Water Damage Repair in Texas Started Now
Water spreads while you wait, and mold follows within 48 hours. Call Texas Water Response at (512) 555-0147 and a live dispatcher will send a certified crew to your address. We answer 24/7, we quote before we start, and we finish the repairs ourselves.